It is really different to utilize a stand-up lift truck as opposed to a sit-down unit. The way you move and lift loads in addition to your movements are really different. If you do not have proper training for utilizing a stand-up model, you can probably cause harm to yourself or to co-employees. When using a stand-up model, you need to follow the correct safety rules. There are some basic operating standards that need to be met when using a stand-up model.
When starting, stand up on the lift truck in order to get a feel for the steering knob and the controls. The steering is handled using the knob steering plate rather than a steering wheel. Remember that this particular knob moves really fast, thus, you should get used to moving it carefully in order to be certain not to over steer. The horn is situated on the control handle, as is the control for backwards, forwards and the fork movement. The floor pedal enables the machinery to move.
Turn the key to start the equipment's engine if you are set to begin. The forks should not be extended at this stage. If you are moving all-over the floor, the forks must be pointed slightly upwards. Never drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and in order to make the lift move forward, step on the pedal. If you are backing up, be sure to beep your horn in order to warn people around you. Look behind you before stepping on the pedal so as to make sure the path is clear and safe. Next, while stepping on the pedal, pull the control handle towards you. Stay focused and alert and make sure that you are always operating in a safe manner.
When approaching a corner with the lift truck, turn the steering knob in the direction you are heading. Make sure to keep your foot on the accelerator and keep your hands on the control handle. When turning right, the steering knob will move in a clockwise direction during forward travel. If you are turning left, your steering knob would go in a counter-clockwise direction.
The stand-up models take some getting used to, specially if you have just operated sit down units. With some training and taking some time to know the machinery, you can handle loads efficiently and quickly in little time.